• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. However If windows with double panes are anchored by internal beading it will be more difficult to take out the old panes and put in new ones. In this case you'll need locate some plastic spacers that will help the new pane to fit perfectly into the window frame.

If you are going attempt to remove the window panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor where they could be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your property until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they can suffer from a variety of problems including sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fit. If you're satisfied with the fit of the window, tighten the screws to secure them in the right position.

If you are unable to move the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles could also loosen. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wears out. Fortunately, it's easy to fix the handle of a Window repair that is loose yourself. You'll first need to close the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it is important that you take action. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking used previously might need to be removed before a fresh layer can be applied. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window repair near me.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with a breeze. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is essentially a simple process but it can be easier when you have a person to help you hold the frame up.

Make sure that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to give suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window repair easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to do this once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window repairs near me.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges, also due to wear and tear can become misaligned, this can cause a gap to form where the sash joins the frame. This can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to get them realigned or replaced. In addition, the interlock could also become unbalanced. This happens on the hinge's side and may need to be cleaned. In certain instances it is possible to replace the hinges.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time, and let air escape through these gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be placed on top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window you should consult an expert immediately.