• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how new your subaru key replacement cost is, you may need to have the key fob programmed by an automotive locksmith. This is usually accomplished by connecting a programming machine to the computer in the vehicle.

To program your Subaru begin by opening the driver's doors using the door button control, and then shut it. You will hear a chime and see the dome lights flash in the instrument panel.

Step 1: Locate your transmitter circuit board

There are many ways to program your key fob. First, you must determine the type of key fob that you own. This can be done by taking a look at the shape of your key fob or by listening to your car for a chime.

Once you have this information, you can start the process of programming your key fob at home. You will need an aluminum flathead and a key to do this. Open the key fob by twisting it. Then push the key made of metal into the case and then release the battery from the small tabs that secure it. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

It is an ideal idea to change the batteries in key fobs in case they are not working. In some instances buttons on the key fob might be damaged. If you notice that the button's metal contacts have become loose then you can try reconnecting them in order to make them function again.

Before you begin the process, ensure the doors of your car are shut and the ignition is off. You can accomplish this by closing the driver's door and pressing your door button ten times in rapid succession. Then, you should hear the instrument panel chime, and your dome lights will flash. This means you're ready proceed.

Step 3: Insert the fob of your key into the ignition

Many online articles will explain how to program your brand new subaru key fob or replacement key for subaru Outback Subaru keyfob at home. However, many of them do not give very specific instructions. Reprogramming an electronic key is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat, with all doors closed and the engine turned off. Use the door button to open all the doors. Open and close the driver's door a second time. Then insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system should chirp to confirm that the settings have been changed.

Step 4 Step 4: Switch on the ignition

It is crucial to understand that this method of programming a key fob is effective if you have a functioning key. If not you can find an auto-locksmith or dealer who will need to program the key for your Subaru Fort Bliss.

Once the key has been programmed, it should be capable of starting your vehicle within five minutes. To begin, ensure that all doors are shut and the engine is turned off. Sit in the driver's chair and open all doors using the button for the door. Insert the key into the ignition then turn it on to the off position (the electrical systems will come on, but the engine remains off) then turn it back to the off position ten times in quick succession.

Step 5 Step 5: Unlock the Driver's Door

Subaru offers a wide range of luxury cars that come with key fobs that lock and unlock the doors as well as start the car and defrost the windows. However, sometimes, these devices stop working properly.

Find a locksmith or dealer to fix the issue. This will solve the issue and ensure your vehicle is safe.

To accomplish this, open the driver's door and close it. Place the key into the ignition and turn it until it is in position 1. Then, it should be returned to the off position. Repeat this ten times one row as fast as you can. After the tenth time, you should hear a sound.

Step 6 Step 6: Press the Lock/Unlock key on the Driver's Door

The process to replace the battery in a Subaru remote key fob is easy. First, open the external fob casing. Then make use of an flathead screwdriver, to pry open the inside of the case and remove the old battery.

After removing the battery to replace it, you can replace it with the new one. Close the case. Then, get in the driver's chair and unlock all doors using the door button control. Put the key in the ignition and turn it so that the electric system is switched on, but the engine remains off. Repeat this 10 times in a row until you hear the chime from the instrument panel. This will put the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

The irritating chirp that may be heard when locking or unlocking a Subaru Key Fob from the outside of the vehicle can be very distracting for certain owners. In some instances the chirp may be removed by closing and opening the doors as well as a double-click of the lock button on the key fob.

Close all doors, including the lid that holds the fuel, and turn off the ignition. For 10 seconds then press and hold the lock button on the key fob. The instrument panel emits a chime once this is accomplished. The chime signals that the lid of the fuel-filler door are locked. It is possible to alter the setting so that the doors lock automatically without the need to press a switch.

Step 8: Enter the 8-Digit Transmission Number.

Keep the first 8-digits in your mind. Now, get into the driver's chair, close the doors and turn the replacement key for subaru outback in the first position. After 10 turns, your panel will chime once.

The circuit board for the transmitter is inside the key fob case. The circuit board should have one or two 8-digit numbers. Note the sequence that starts with the first number, and follow the instructions in this guide to register the code in your vehicle's system. This may require visiting the dealer for older models.