• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors are worn out over time and will need to be replaced. In this case, it is important that the new handles conform to the critical dimensions of the previous handle.

The top screw's location the lever, and the keyhole dimensions are the three measurements you have to determine. Refer to the size guide for help with this.

Inline Lever/Lever

A lever door handle is a modern handle that can be installed on new or replacement doors. This kind door handle is available in a variety of styles & finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles made of uPVC/Composite are constructed of durable materials and are perfect for doors with multi-point locks that require a heavy duty design. The handles are inline and operate off the same spindle and screw fixings, so they can be easily incorporated into doors made of uPVC/Composite, either new or old.

The handle can be adjusted and angled to suit any user. The handle has been endurance tested to 200,000 cycles. This will ensure the quality of the finish and the performance of the handle over time. The sprung lever is also adjustable to fit a broad range of locks. This is particularly useful for narrower doors where the cylinder is situated further back in the door. A shortened lever can also be used on doors with latches which can be operated with the thumb on the inside.

Lever Pad

The lever pad upvc handle is distinct from the lever handles that are found on most doors. These handles can operate from a single spindle (inline) or independently from both sides using two offset or inline spindles (pad). They are typically used on UPVC doors with double glazed window handle double glazing window handles. They come in a range of finishes & variations.

The handles for upvc windows have been tested to a minimum of 200,000 cycles and are available in several finishes including White, Silver, Chrome & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for its intended use.

All UPVC levers for handles include a spindle and screws and can be installed on the uPVC door. The backplate fixing centers of 211mm allow for a wider size of handle which can often be a benefit in replacing a defective or worn multi-point door lock mechanism. The handle levers are sprung, solving the problem of handles that slide out of their horizontal position when not in use.

It is essential to match up the PZ dimensions of both the multipoint lock and the uPVC doors when choosing the replacement UPVC spindle and handle. This measurement is often referred to as the handle centre or 'cylinder centres which is a crucial aspect in ensuring that you have the right handles.

Once you have the correct PZ size you will then be required to make sure that the handle lever pads and push pads are of a suitable shape for the American with Disabilities Act (ADA) compatible handles you require for your doors. These are typically square or round with an internal lever, and an external push pad.

The majority of UPVC lever pads that we offer are sprung, which means that they return to their horizontal position after not being used, instead of hanging out and possibly securing in the frame. This stops draughts from entering the building. It is also the case that the majority of the UPVC handle lever pad style handles are swivel that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks can be found on uPVC and other kinds of doors. They operate with a key to unlock a cylinder that then reveals pins which can be aligned with those inside the lock body, allowing them to turn the cam, thereby opening the door. Euro cylinders are available with up to six pins. External and internal doors require different levels of security.

Selecting the right cylinder for your needs is vitally important; this depends on how your door and handle are used. Doors that are external, for instance, should be fitted with higher security cylinders while doors inside can be secured with a standard cylinder. Some cylinders have extra features that increase security, for instance, anti-drill or anti bump properties.

To make sure that the euro cylinder is the correct size for your door, it should be measured accurately. The cylinder should be measured from the hole for fixing screws in the middle to the other end of the cylinder including the thumb turn if you have one. If you are unable to measure with the lock in position, you can remove it. It is essential to ensure that there is no cylinder that extends beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.

The design of the latest cylinders comes with anti-drilling as well as bump resistance features. They are designed to minimize the chance of attack by forcing cylinders to turn in a different direction. This will help to stop the attack and ensure your doors are secure.

Certain cylinders are constructed to withstand snapping. This is a typical attack on cylinders. A specific tool is used to break the lock's break line and then the front of the cylinder is snapped off. This is a much faster and simpler method to gain access than through the use of a multipoint locking system. It also leaves less evidence of the burglary which can make it difficult to prove insurance claims.

Spring Cassette

The spring cassette is situated within the base plate of the door handle. It provides a sprung solution to help return your multipoint lock handles back to their normal position after use. Previously a lot of these types of handle didn't have a spring built into them, and without it they tend to droop or drop when the locking mechanism has been disengaged. Adding this simple component is among the best methods to correct this, and is an effective way to keep your doors made of upvc from getting stuck in the open or closed position, since they aren't always simple to manually close by hand.

These spring cassettes are specially made for use with multipoint locks sprung They will not work with multipoint handles that are not sprung and you will require a hole specifically cut in your backplate to allow these to fit (please check the image for a technical diagram). These cassettes are a replacement for damaged or missing cassettes that are in the backplate of uPVC door handles. They have a square cut-out that accommodates an 8mm spindle and they are supplied individually.

These spring cassettes provide a great value solution to the problem of door handles that have become sagging. They are simple to install and will increase the lifespan of your uPVC doors. For more information on our range of uPVC spares and accessories contact us today. in contact with our team. We are always happy to provide expert advice and to assist you.