• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. However, if you have double glazed window repairs pane windows that are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case you'll need to find some plastic spacers to assist the new pane to fit properly into the frame of the window repairs near me.

If you are going to attempt to remove the glass panes yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass so that any shards will fall onto the cloth rather than on the floor where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the window and the door is substantial, you may need to consider a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. In time, they could be affected by a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sagging. You'll first need to open the windows so you can get at the frame. With an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you're happy with the fit, you can tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen up. This is usually due to screws that have loosened over time, but it can be due to the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close your window and do an experiment to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed window repairs-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily corrected by a Upvc window repair window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in the breeze. They can be repaired by any skilled DIYer and can be done within a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's very simple to change the hinges on a window however it is easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window incorrectly or a faulty installation in the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you advice.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges may also become misaligned due to wear, which can cause gaps where the sash and frame meet. If they are damaged beyond repair, it may be required to realign them. The interlock, which is on the hinge side of the window repairs and can also become misaligned, again it may be possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next most common reason for draughts are the window seals, these can become worn down or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.