• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repair repairs can help homeowners save money and help keep their homes comfortable. In the event of severe damages such as broken glass or a shattered frame, a replacement window may be necessary.

However, many other issues can be addressed to extend the life of your windows. Some common issues include:

Cracked or broken Panes

Glass that is cracked could be caused by a lawnmower that throws errant rocks or by the blow of a tree branch by strong winds. This not only looks awful, but it could cause higher energy bills as the broken pieces allow cold air into your home. Luckily, it's usually relatively easy to fix windows with damaged panes.

Begin by carefully removing the glass using gloves and sunglasses. You may have to make use of a utility knife in order to break loose any remaining putty or glazing compound around the edges of the frame. Next, wipe down the surface of the glass and the wood of the frame with a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof around the frame's perimeter. This prevents water from getting in through the crack, which can cause further damage to both the frame and the glass.

If you have double-pane glass, a bad crack could compromise the gas layer between the panes and make your windows less insulative. If the crack is severe enough to cause damage to the integrity of the glass, or the glass has an inner pane that's totally missing, it's time to contact an expert.

Cracks in the glass caused by thermal stress may occur when there is an extreme temperature difference between your home and the outside. This causes the glass to expand and shrink. If the cracks are located on two sides of a window, it is recommended to replace it rather than attempt to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready for replacement. It can also keep out cold winds and bugs. You can also cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. This isn't an indefinite solution, but it can keep insects out and cold air away from your home. If your windows are old and you're starting to notice cracks in the glass It's an excellent idea to talk with your local window company to determine if replacing the entire upvc window repairs might be the best solution for you.

Rotten Wood

Wood rot is a common issue with windows. It can degrade a house's appearance and create a safety danger. However, it is possible to repair rotted wood. First, you must determine the root of the wood rot. This can be done by looking for roof leaks and gutters that aren't functioning cracking caulking, and any other areas which allow water to penetrate the wood.

You'll then have to remove the rotten parts of the window frame. This can be done using either a chisel, a rasp or claw hammer. Once the rotten areas have been eliminated then you must replace them with new wood. It is recommended to use pre-treated wood for this project since it is resistant to decay. If you cannot replace the rotted timber then you can use wood filler and hardener to repair the damaged area. Most hardware stores will carry this type of product. Follow the instructions on the label of the product to achieve the most effective results.

After you have repaired the rotten areas of the windowsill, it is essential to protect the newly-repaired area. Apply a water-resistant sealant on the wood. Sikkens for instance is a great one to use.

You can also use a two-part epoxy filler to protect the wood from further damage. This product is easy to apply and leaves a beautiful finish. However, it's important that you adhere to the instructions for application on the label. Once the epoxy filler is dry, you can smooth the wood's surface. Start with a rough sandpaper and then move on to more smoother grades.

You do not want to expose the damaged part to further moisture. It is recommended, so, to protect the surface you have repaired with an oil-based primer which will shield it from water. After that, you can apply the waterproof wood sealant.

The W won't open

There are many reasons windows don't open. Wood frames can warp in rainy weather, or the house may have settled or someone might have nailed it shut to protect themselves. With a little patience and the right tools, you can unlock most stuck windows.

One of the most common causes of windows that isn't able to open is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges, and locks. In addition, metal hardware may get rusty when in contact with humidity and direct sunlight. Keeping these areas lubricated with spray grease will help prevent the oxidation process and ensure that your window is working correctly.

The pulleys that raise or lower the window could be loosened, or break. These components may lose tension and get blocked especially when the window is situated two or more stories higher than the ground.

If you have difficulty opening a door, use a pry-bar to gently open the door. Put a piece of wood on the frame to give your pry bar more leverage and be careful not to damage the window or wood. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A damaged spring can be the reason for a upvc window repairs that won't lift or lower. You'll need to check your owner's guide for more information depending on who made your windows.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still unable to open, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let windows in your home go from functional to unusable. A window that isn’t properly closed could leave your home vulnerable for water damage and burglary. Contact us for more information about our windows replacement and services today!