• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to leave and enter the house at will is an excellent method to keep your pet active and mentally stimulated. Having a flap can also aid in reducing accidents due to toilets by making it easier for your cat to exit the house when it is required to.

Measure the Door

A cat flap allows your pet to go and come at their own pace, without having to open the door for them. This makes it ideal for keeping them in when you're at home or away, and helps keep unwanted pests out of the home as well!

It is essential to examine the door's measurements to ensure that you have the correct size cat flap. There are many sizes available. This will ensure that you purchase the right size to fit into your door made of upvc otherwise, it could be too small or too large and your cat will have trouble using it.

Before doing anything however, you should take a ruler and measure the width of the door in various places along its edges. Also, you should measure the door's height in a few places. This is because a door that is too high can cause your cat to do an exercise routine like a gymnast every time they need to use the flap!

Ask a glazier for help when you're unsure of what to measure for the door. They will be able determine if your door is suitable for cat flaps and can advise you on what size flap to purchase.

When you've got your measurements, the next thing to do is to draw the shape of the hole on the door. This will help you when you cut the hole, and will save you money!

You must also ensure that the hole you're creating is placed in the right spot. If you're fitting the cat flap install flap onto the patio door, it is important that the hole doesn't get too close to the hinges. This could cause leakage or issues with the seal.

It is best to leave the task of installing the cat flap on the glass door to an experienced glazier. It can be very tricky to fit a cat flap into an existing pane of glass, and you may be surprised to find that the process causes it to crack and lose its weatherproof seal.

Measure the Cat

A cat flap lets your pet come and go whenever they want without you having to leave him home all by himself. It can also stop draughts entering your home, which isn't good for you or your cat.

However, if you own a uPVC or composite door it could be a challenge to put in the cat flap. These kinds of doors are often made of different materials than traditional wooden or uPVC doors, and the installation process is different as well. Before you consider fitting the cat flap on your upvc cat flap door panels or composite door, be sure that it is compatible and that you have consulted the manufacturer as any modifications could cause the warranty to be invalidated.

In general, these kinds of doors are made to be durable and tough and have insulation built-in. They are more resistant to the weather than other types of doors, but it isn't easy to install an animal flap. If you're unsure about whether your uPVC or composite door will accommodate a cat flap, consult with a professional jointer prior to beginning.

You'll need to determine their height in order to ensure that they can pass through the door. This will be easiest if they are asleep or calm so that they're not moving around too much. Once you've determined their height, you can measure the distance between their stomach and the floor to determine where the bottom of the cat flap should go. You can then mark this location on the door.

If you are using power tools to cut your uPVC or composite door, you will need be extra cautious. The process of drilling into metal could cause cracks, especially in the case of toughened glass. It is highly recommended to hire an expert glass installer when putting in the cat flap inside a pane. This will prevent the glass from becoming fragile or shattering. A glazier can also supply you with a circular hole for the flap for your cat, which is less likely to crack and is safer for your cat to use.

Cut the Hole

A high-quality cat flap installer flap will come with a drawing template that you can use to mark the area on your door where the hole should be. If it doesn't, make your own with a thin piece of paper (tracing papers are perfect). After the shape has already been penciled on the door, you can use your spirit level and make sure that it is horizontal. This will ensure that your cat flap is positioned correctly in the door, and it won't slide open or close.

Then, you can use your jigsaw to cut out the shape marked on the door. Make sure that you're using a blade that is suitable for use on uPVC doors - usually it will be marked as such If not, ask the staff at the DIY store for guidance. Once you have the hole drilled, place the flap section against it and then push it out to ensure that the action of the flap is smooth. If it is bound on any point, then use a file or rasp to correct this.

Check that there aren't any electric or gas pipes within the door you're going to cut into. The jigsaw may damage them. Also, be aware of any handles, or other fixtures that are on the door which must be removed to accommodate the cat flap. Be careful not to damage these items while cutting.

Most people who install a cat flap on their own will have a standard solid uPVC front door, so they will not have to face these problems. But, if your door is made of wood or has a decorative panel that cannot be removed, it will increase the difficulty of the job.

It is always worthwhile seeking assistance from an expert cat flap fitter when it comes to these types of jobs since it is essential to do them done right to avoid potential issues in the future. Getting it wrong can lead to the door being damaged and may cause the warranty to be invalidated.

Place the Flap

Once you've made your hole, you can place the flap to see whether it opens and fits. If you spot any areas that stick or catch to the door, smooth them out using an sandpaper or hand file until it is a perfect fit and opens without issue. Make sure that the flap is perfectly flush with the door.

Some kits include an example of this, however, if it doesn't provide a template, you could use a piece or thin paper instead, something like tracing paper ideally. Place the paper on the door, and draw a line to show the location where the flap is placed (this will serve as your cutting guide). Then, using the pencil lines you've drawn on the door, mark out four screw holes in the corners of the flap - these will be the screw points you'll use to fit it into the correct position.

Most uPVC door are solid and easy to cut. If your door is constructed of composite or GRP the process can be more difficult. If you're not familiar with this, it's recommended that you hire a professional. They should also be able to advise you on whether or not your specific door is suitable for cat flap installation - funny post,.

If you're planning to install a cat flap into composite doors, you need to first confirm the manufacturer or a professional joiner. Any alterations made to these doors could cause the warranty to be void. If you decide to do the work yourself, keep in mind that it could be messy and could be dangerous.

For composite doors, you'll typically need to use a saw or grinder to cut through the door panel itself rather than simply through the GRP. This can be a dangerous job, and you'll have to be extra careful to not damage the door. It's important to remember that cutting a hole in any kind of glass door is a lot more difficult than making the same changes in a uPVC or solid timber door.