• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go inside and out at their own pace, without needing to let them in or out. They also can help stop your cat from peeing in the house.

Installing a cat flap on a door panel made of Upvc is much easier than in a glass door, however it requires some knowledge and the proper tools.

Take a measurement of the door

Fitting a cat door in a front door can be difficult, but provided that the cat flap is the appropriate one and you follow the guidelines, it shouldn't be too difficult. We will be showing you how to mark out the shape, use an jigsaw for cutting out the area in the door and then finish off the job by securing the cat flap to the door. This will ensure the flap remains in place and also protects the doors from the damage caused by rain and wind.

The first thing to do is measure the width of your pet in order to get a precise measurement of the size of cat flap you'll need. This will allow you to choose a cat flap that is big enough for your pet to walk into the house and exit without having to open the door each time.

Once you have the measurements, you can determine the location on the door where the template should be positioned, usually, this is done using an X, however some kits include drawings that show where to drill, if yours does then stick it to the door and use a pencil to draw around it. If your door has a sill or moulding along the bottom edge of it then make sure you have clearance from these as this will keep your cat safe and prevent them gaining access to your home.

Next put on your eye protection as well as a dust mask, and using a jigsaw begin cutting along the line you have pencilled in. Don't press the blade too hard, as this can make it cut faster than you'd like it to. Set the square with a ruler to ensure you are cutting the material correctly and that the cut is a rectangle shape. When you are satisfied with the result, you can remove the remaining door material.

Draw a Line

The cat flap is a great way to let your pet out and in without worrying about them being a nuisance to a visitor, or leaving unwelcome gifts in the home. It also prevents draughts, and helps keep your home's temperature stable. The installation of a cat flap your door might seem difficult for those who haven't attempted it before. Many people will call a professional carpenter or joiner to do the job. It is an option, but you can do it yourself if your tools are in order and the directions are adhered to.

Although this is much easier to do with a wooden door, it is still possible in uPVC doors, though you need to be very cautious not to damage the doors as this will end the warranty. The first step is to examine the door's measurements to ensure it will accommodate the new cat-flap. This should be easy enough when you have the standard uPVC door, but you may require extra care if you are using a composite or other type of door since these can be more difficult to cut into than solid uPVC panels.

The next step is to measure the height of your cat flap installer near me's belly. This is the height from the floor to the bottom of the cat's stomach and you will need to locate a place in the door where this measurement will fall within the range your cat flaps for french doors can comfortably pass through. Once you have the information you'll need to mark the area with a spirit level and a pencil so you are certain that the opening will fit your cat.

After you have marked the area, it's time to cut the hole. You will need to use an jigsaw. It is crucial to take your time in order to ensure that the cuts are clean and smooth instead of uneven and rough, since this could damage your door. You should also remember to wear safety glasses and a dust protection mask at all times when using the jigsaw, as inhaling the sawdust can be dangerous to your health. After you've completed the cutting process, you will have to smooth the edges of the hole using sandpaper, so that your cat flap can be fitted easily into place.

Cut a Hole

The process of Fitting cat flap in upvc door panel a cat flap to an existing door panel or double glazing sealed unit can be difficult. If you're not proficient in DIY, it's recommended to hire an expert to do the work for you. A botched job could not only be unsightly and unattractive, but could also be a security threat. It could let cold air to enter when the cat is outdoors and hot air out when inside.

The first thing you have to do is mark out the position of the hole in the door with an eraser and an ax level. This will ensure that it is placed and runs flush with all the other components of the door. You should make sure you have some sandpaper on ready to smooth any edges.

Once the line has been drawn, you can cut the hole with a jigsaw, remember to wear the appropriate safety gear for working with an electric tool. If you're concerned about the noise, you can get a jigsaw with a cord that is quieter and easier.

It is crucial to only remove the material that is required for the fitment of the cat flap. It is essential to leave a little extra material to cover the wall of the flap. However cutting away too much could cause issues or even damage to the door frame.

If the upvc door has a metal panel or frame, it could interfere with the microchip flap. In this scenario, you will need to create an over-sized hole to ensure that the metal does not come into contact with walls of the flap.

If you are fitting the cat flap onto the frame of a double glazed windows with a metal frame then you'll need to speak to a specialist who can provide you with a new pane of glass that already has the hole for the cat flap inside. This will be less expensive than trying to fit a cat flap in an existing pane that wasn't designed for this purpose.

Install the Flap

Cat flaps give your pet the freedom to go and come anytime they want and let them relax in the home whenever they want to. However, if you have an uPVC door, it may be difficult to fit an animal flap, especially if you don't own glass panes that can be cut for one. If you're able to buy and install a half-glazed replacement uPVC panel then it is possible to add the cat flap to these doors. It's not as simple as simply making a hole in the door however, and there are a few things you'll need to take care of first to make sure it's secure.

A composite, uPVC, or GRP back door with cat flap fitted panel is typically made up of a flimsy plastic outer skin bonded to a soft insulating polystyrene core. The material is fairly fragile and care must be taken when cutting into it to avoid damaging. This type of door typically comes with a template drawing which you can use as a reference to cut the hole into your door.

Once you have marked the position of the hole in your door, now it's time to fit the cat flap. You can pick from a wide range of models, ranging from simple push-button models to microchip-activated ones that only let your pet in. No matter which type of cat flap you pick, it's vital that your cat can use the flap without getting caught in the rain.

It is a good idea to select circular fittings rather than a square one, as circles can be more securely cut into door glass. This is because square holes can leave the glass vulnerable to cracking when a drill is used on it. This is also a safer choice, as you won't have to drill into the toughened glass which could break and hurt your pet or family members. This is especially crucial if you have a young or elderly person in your home who could be injured by shards glass.