• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out with time and require to be replaced. It is crucial to be able to match the dimensions of the old handles when replacing them.

The top screw's position, the lever and the keyhole sizes are the three measurements you need to verify. Use the size guide to help with this.

Inline Lever/Lever

A lever/lever door handle is a contemporary handle that can be put in on new or replacement doors. This style door handle is available in a wide range of designs and finishes. A number of manufacturers make this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/composite door handles handles are made of tough materials and are ideal for multi-point lock doors that require a robust design. The handles are inline and work from the same spindle and screw fixings so they can be easily incorporated into doors made of uPVC/Composite, either new or old.

The handle can be positioned and angled to fit all users. The handle has been tested for endurance up to 200 000 cycles. This ensures that the finish is of high quality and performance will last for a long time. The sprung lever is also adjustable to accommodate a wide range of locks. This is particularly beneficial for narrower door frames where the cylinder is located further back. A shortened lever can also be used on doors with latches that can be opened by the thumb located on the inside.

Lever Pad

The lever pad upvc handle is different from the lever handles for internal bifold doors that are found on most doors. These handles are operated by one spindle, or two spindles, either inline or offset. They are typically employed on UPVC doors with double glazing windows handles glazing. They come in a range of finishes and variations.

The handles are available in a variety of finishes, including White, Chrome and Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.

All of the UPVC lever pad designs are supplied with screws and a spindle which allow them to be fitted on any new or existing uPVC door. The backplate fixing centres of 211mm permit a bigger handle, which can be beneficial when replacing a faulty or worn multi point door lock mechanism. These levers for handles are also sprung, solving the problem of handles that slide from their horizontal position when they are not being used.

It is important to match the PZ dimensions of both the multipoint lock as well as the uPVC doors when selecting the replacement UPVC spindle and handle. This measurement is often called the handle centre or 'cylinder centres' and is a critical aspect to match the right handles.

When you have the right PZ size, you'll need to ensure that the lever pads and push pads are a suitable shape for the American with Disabilities Act (ADA) approved handles you need for your doors. These are usually round or square with an internal lever, and an external push pad.

The majority of UPVC Lever Pads we offer are spring-loaded. This means they can be reverted to a horizontal state when they are not in use, rather than hanging and possibly sticking in the frame. This stops draughts and cold air from entering a home. The majority of UPVC lever pad handles come in both left and right handed versions, allowing them to be installed on either side of doors.

Euro Cylinder

Cylinder locks are usually used on uPVC doors, but they can be utilized on other types of doors. They work with a key to unlock a cylinder that will reveal pins that can be aligned with those in the lock body, allow them to rotate a revolving cam, thus opening the door. Euro Cylinders are available with up to six pins. Internal and external doors require different levels of security.

Choosing the right cylinder is essential; it is contingent on the way your doors and handle are utilized. Doors that are external, for instance are required to be fitted with higher security cylinders and internal doors can be secured using the standard cylinder. Additionally, certain cylinders are available with extra features that can improve security, for instance anti-drill or anti-bump features.

To make sure that the euro cylinder is of the right size for your door, it must be measured correctly. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn should there be one. If you cannot measure with the lock in position, you can remove it. It is crucial to not have a extension of the cylinder beyond the handle or escutcheon. This could make it susceptible to lock snapping attacks.

The design of many modern cylinders has anti-drilling and bump resistance features. They are designed to minimize the chance of attack by forcing cylinders to rotate in a new direction. This can help deflect the attack, and keep your door safe.

Certain cylinders are constructed to withstand snapping. This is a common occurrence on cylinders. A specially designed tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a lot faster and less difficult than gaining access through multipoint locks. It also leaves no evidence of a break-in which can impede the insurance claim.

Spring Cassette

The spring cassette is positioned in the base of your door handle's backplate providing a sprung solution that returns the multipoint lock handles back to their normal position after usage. There was a time when these types of handle did not have a spring integrated into them and without this they can droop or drop when the locking mechanism is disengaged. This simple part is the most effective way to address this issue. It also stops your upvc door from becoming stuck in the open or closed position since they aren't easy to close manually.

These spring cassettes were created to be used with a sprung multipoint locks. They are not compatible with unsprung handles, and you will have to cut a hole in your backplate in order for them to fit. (Please see the image for a more detailed diagram). These cassettes are a replacement to damaged or missing cassettes in the backplate of uPVC patio door handle replacement handles. They are sold as one unit. They come with a square cut out that is able to accommodate an 8mm shaft.

These spring cassettes are a fantastic value for money way to fix the problem of door handles that are sagging. They are simple to put in and will extend the lifespan of your uPVC doors. For more information about our wide range of uPVC accessories and spares, please feel free to get in contact with our team. We are always happy to offer professional advice and assistance you.